Many a times you experience trouble with DISH Network due to some external problems like bad weather or for the changes in voltage spikes. Many of you who have experienced this problem know that it sometimes becomes a very hard to come out of a difficult situation like this. So let us take a quick look at the problem to know how to deal with this critical situation.
If something hinders the signal getting from the satellite to your dish antenna the picture quality is likely to become the worst sufferers. In case the signal is being blocked completely, your picture on TV will disappear too. So you have to make sure that nothing comes in between your dish and its direction to the sky this can be anything from a tree branch, to motor home, motor home of your neighbor’s, any kinds of build-ups of snow, ice, or even excessive water on the dish, or anything else that you could imagine. However, there is a simple solution to this. All you have to do is to get the signal flowing unobstructed back to your DISH Network receiver and for which you have to remove the obstruction.
The Cables and Connections – The wiring and connections which carry the satellite TV signal from the satellite dish to your DISH Network receiver can also be a cause for this problem. It is not likely that this image will swiftly cut out on you, particularly in the fourth quarter, if this wiring is bad. The easy method to test this is to make sure that the reliability of the cables is still intact and that each of the connections is tightly secured. If you are still not getting picture on your TV, try plugging the cables into another TV, or you can also try routing the picture through the VCD.
Your DISH Network Receiver – On very rare occasions, your DISH receiver may stop receiving as well as decoding the signal properly. First of all, you need to reset your receiver by pressing as well as holding the Power button on your DISH receiver panel for about 10 seconds. Your receiver will be reset and will return to normal and in most cases the issue might get resolved as well. This is the process to set the DISH receivers to the default setting. If you are not able to resolve the issue using the above methods you can call DISH Network for help!
If you try these steps to bring back your crystal clear television entertainment. With these steps, you should be able to fix the TV signal issues. However, it is advised that you shoud not remove anything from the satellite dish because that can be dangerous both for you and the TV signal. Remember your safety is the first priority!
However, if you still do not get clear picture on TV consider calling up the DISH Network technicians home. They have a long experience for fixing these problems and will make your TV up and running in no time.
When you are watching your favorite programs on DISH Network, you may come across some issues with TV connection. However, with a little tips you can get the picture to life on DISH Network channels.
Related Wireless Networks Articles